Fara í efni

Karfan þín

Karfan er tóm.

VNR.: AMDJ1900000042

AmDJ Eliminator Mega 64 Profile EP

Samtals m/vsk
35.990 kr.
The Eliminator Lighting Mega 64 Profile EP is a low profile LED Par with 12x 4W Quad LED (RGB+UV) designed for uplighting, stage lighting and wall washing. With a 25-degree beam angle and 64 built-in color macros, the Mega 64 Profile EP is great for permanent or portable lighting solutions to create smooth swaths of vibrant color.
Framleiðandi ADJ
Samtals m/vsk
35.990 kr.

Nánari lýsing

Source:

• 12 x 4W Quad (RGB+UV 4-IN-1) LEDs
• Light output: 3,520 LUX @ 2M; 820 LUX @ 4M (25-degree beam)
 
Features:
• Smooth RGB Color Mixing (fast or slow color change operation) with no RGB+UV shadows
• Power & DMX Ins/Outs are intelligently designed to sit sideways so the unit can be set flat on the ground
• Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers
• Flicker Free
 
Control:
• DMX-512 protocol
• 5 DMX Channel Modes: 4/5/6/9/10 Channels
• 5 Operational modes: RGB+UV Dimmer Mode, Sound Active Mode, Auto Run Mode (16 Color Change Programs, 16 Color Fade Programs, & Color Change & Fade Combination), Static Color Mode, & DMX Controlled
• Stand Alone or Primary/Secondary Configuration
• 4-Button DMX LED Display
• 64 built-in Color Macros
• Refresh Rate: 504Hz
• Electronic Dimming: 0-100%
• LED Pulse and strobe effect
 
Connections:
• Linkable via 3-pin XLR cable
• Power: IEC In/Out to daisy chain power (Link up to 12 Mega 64 Profile Plus fixtures)
• With Wired Digital Communication Network
 
Electrical:
• Multi-voltage Operation: AC 100 - 240V, 50/60Hz
• Power Draw: 54W Max
• Fuse: 2Amp
 
Dimensions & Weight:
• Dimensions (LxWxH): 10.5” x 10.25” x 4.5”/ 261 x 260 x 110mm
• Weight: 5 lbs./ 2.1 kg.
 
What’s Included:
• Includes scissor yoke to hang on truss, mount on a wall or set on the ground
• Power cable length: 1.8 meter (IEC)
 
Accessories:
• Compatible with ADJ LED RC2 wireless infrared remote control up to 30 ft./ 10M (sold separately)
• F4 Par Bag EP (sold separately)

Nýlega skoðað

Ljósabúnaður - Fleiri vörur

AmDJ MyDMx-RM ljósast. hugb.

ADJ’s myDMX 3.0 is a multi-platform DMX control software/hardware system (Windows and OSX Mac compatible). myDMX RM has a new, robust, 19” rack mount, hardware dongle and exciting new features to take greater command of your light show. myDMX 3.0RM allows you to program your light show with myDMX 3.0 software, upload programmed data to myDMX RM then playback straight from myDMX RM in stand-alone mode without a computer. This is the ideal control solution for clubs, bars, schools...  
Samtals m/vsk
41.990 kr.
Á lager

AmDJ MyDMX5 ljósastýring hugb.

Elevate your lighting display to unprecedented heights with ADJ's latest DMX lighting software/hardware. Boasting a vast selection of over 20,000 lighting fixture profiles, a cutting-edge timeline feature, a dynamic live mixer, and seamless control through iPhone, iPad, or Android devices, myDMX5 empowers you to effortlessly craft larger and more spectacular light shows than ever.
Samtals m/vsk
89.990 kr.
Á lager

AmDJ Eliminator Mirrorball motor3U/min/50cm

The Eliminator Lighting MBMHD3 mirror ball motor safely supports mirror balls up to 20 inches. It has a very desirable slow rotation of 3 rotation per minute. This allows for an optimal effect as hundreds of beams of light slowly move around a room when a pin beam fixture is used (lighting fixture sold separately).   The MBMHD3 is ETL approved for electrical safety allowing installers and event producers peace of mind. The compact size and weight, and 3 mounting holes make for easy installation into nightclubs, fun centers, event centers, lounges, and bars for indoor use only.   The MBMHD3 includes a 13-inch chain that attaches to your mirror ball. The chain may be adjusted depending how close you want your mirror ball to the motor.
Samtals m/vsk
7.590 kr.
Á lager

AmDJ Eliminator Mirrorball motor3U/min/40cm

Re-create the disco days of the late 1970’s, when mirror balls ruled the dance floor with Eliminator’s EM 16. Perfect for all parties, this 16-inch mirror disco ball includes a ring so you can connect to a motor. Directly shine an Eliminator E106 Pinspot light onto the EM 16 for dramatic effects. You’ll see your dance floor light right up. The EM 16 is so easy-to-use, and fun for all occasions.
Samtals m/vsk
2.590 kr.
Á lager